Directed Electronics Cyber 130XV User Manual page 42

➤
Power Saver in Valet
Mode the in-vehicle status LED illuminates steadily. If the
vehicle is not used (ignition is not turned on) for a one hour
period while the system is in Valet
LED will shut off. If the system remains in Valet
vehicle status LED will come back on the next time the ignition
is turned on and then back off.
p p r r o o g g r r a a m m m m i i n n g g o o p p t t i i o o n n s s
Programming options control your system's normal, operational
set-up. Most options do not require additional parts, but some
may require installation labor.
The following is a list of the programmable options, with the
factory settings in Bold.
➤ A A c c t t i i v v e e arming (2-way remote only) or passive arming (auto-
matic arming 30 seconds after the last door has been closed).
➤ Arming/disarming siren chirps o o n n or off.
➤ The ignition controlled door lock feature o o n n or off: When
this feature is programmed on, the doors will lock three
seconds after the ignition is turned on, and unlock when the
ignition is turned off. If your installer is programming the
security system with the Directed Bitwriter, ignition lock
and unlock are independent features that can be
programmed separately.
38
Mode: When the system enters Valet
®
Mode, the in-vehicle status
®
© 2004 directed electronics, inc.
®
Mode, the in-
®