Directed Electronics Cyber 130XV User Manual page 28

To remote start the vehicle:
1. Press
2. The parking lights will flash to confirm that the vehicle will
attempt to start.
3. In gasoline vehicles, the engine will start 4 seconds after the
parking lights flash. In diesel vehicles, the engine will start
when the WAIT-TO-START indicator on the vehicle's dash
goes out.
4. Once the vehicle has started, it will run for the pre-program-
med period of time (either 12, 24, or 60 minutes - see
Programming Options section of this guide) or until a shut-
down input is triggered.
For a remote start, the remote responds with remote start tones
and the Yellow LED illuminates for 3-seconds.
For a remote start Off, the remote responds with remote start off
tones and the Yellow LED flashes 3-times.
i i m m p p o o r r t t a a n n t t ! ! It is unsafe to operate a vehicle's motor in a
garage or other closed off area. Breathing the exhaust
from the vehicle is hazardous to your health. Never acti-
vate the remote start in an enclosed space.
When you are ready to drive the vehicle:
24
on the 2-way remote twice within 3 seconds.
1. Insert the ignition key and turn
it to the ON (not the START)
position.
2. Press the brake pedal.
© 2004 directed electronics, inc.