Modifying The Location Data - JOBO PHOTOGPS User Manual

4. If you are not satisfied with the location information which has been automatically assigned
to each photo, there are a number of ways you can make changes. These are described in
the following section. Double-click on a photo to see a larger view and more details.
5. When you are satisfied that the location information for each photo is correct, press the 'Tag
Photos' button to save your geotagged images.
6. If you have more photos to geotag you can select another photo source folder and repeat
the process. Otherwise, you can exit the photoGPS application. Before doing so you may
wish to access the 'Device Configuration' window to erase the GPS captures from the
photoGPS.
7. Finally, you can load the geotagged images into a geo-aware application, such as Picasa,
Flickr, etc. to search/organise using the location information, display them on a map etc.
After tagging is completed, the photoGPS software creates a file called Photos.KML in the
destination directory. If you have Google Earth installed on your computer, you can double
click on this file to see your geotagged photos on a map of the world.

8. Modifying the Location Data

When the matching process is complete, if you are not satisfied by the location information (address
and POIs) which has been automatically assigned to your photos, there are a number of ways you
can make changes.
- 9 -