Language Selection; Internet Connection Options; Emergency Reset - JOBO PHOTOGPS User Manual

This tab also allows for a custom copyright message to be specified. If the checkbox is ticked, this
copyright message will automatically be added to the Copyright field of all geotagged photos.

12. Language Selection

The Tools -> Language menu option allows the user to change the language used by the photoGPS
user interface. Supported languages are: English, German, French, Italian and Spanish.

13. Internet Connection Options

In order to generate location information from the GPS data captures, the photoGPS software needs
to be able to communicate with our internet servers. This may not be possible if your computer is
using a proxy system, which is common for many businesses. If this is the case, select the Tools ->
Options menu item and then click the 'Server Connection tab. Then tick the 'Use HTTP Proxy Server'
checkbox and enter the Server and Port details.

14. Emergency Reset

In the unlikely event that your photoGPS is not functioning correctly, read through the
Troubleshooting section of this guide to try and discover the cause of the problem. If all else fails
you can reset the photoGPS using the reset button. This is located behind a small hole in the
bottom of the device casing, close to the hot shoe connector and red status LED. To reset the device
simply insert e.g. a bent paperclip into the hole and push until the reset button is depressed, then
release. Note, you cannot reset while the device is connected via USB.
Geohint
USB 2.0
Button
connector
- 14 -