Introduction; Quick Start Guide; Photogps - JOBO PHOTOGPS User Manual

1. Introduction

Thank you for purchasing the JOBO photoGPS geotagging solution. The photoGPS enables easy
geotagging of photographs by connecting to your camera's hot shoe. This guide explains how to set
the device up ready for use, and how to use the photoGPS and software to geotag your photos. For
further information please visit

2. Quick Start Guide

1. Insert the CD included in the photoGPS package. The CD will start automatically and launch
your default browser and open a local webpage. Press the button "Installer photoGPS" and
install the photoGPS software.
2. Run the photoGPS application. Note that your computer must be connected to the internet
to allow the software to properly configure the photoGPS for the first time.
3. Charge the photoGPS by connecting it to your computer using the supplied USB cable. It can
take up to two hours to fully charge the device, but five minutes is enough for a first quick
test.
4. Attach the photoGPS to your camera hot shoe
5. Go outside and take photographs
6. Offload the photographs from your camera to a computer
7. Connect the photoGPS to your computer
8. Run the photoGPS application
9. Press the 'Import GPS Captures' button
10. Select the source folder containing your photos
11. When the download and processing of your GPS captures are completed, then press the
'Match Photos' button
12. If necessary, edit the photo location information (for more details, see section 6)
13. Press the 'Tag Photos' button to create your geotagged photos
14.
View, edit, share etc. your geotagged photos in Picasa, Microsoft Pro Photo Tools, Flickr etc.

3. photoGPS

www.JOBO.com
Geohint
USB 2.0
Button
connector
- 3 -