JOBO PHOTOGPS User Manual page 7

1. Press the 'Import GPS Captures' button on the Capture Device tab. The GPS captures will be
downloaded from the device and processed to determine their locations. When this is
successful, the resulting
(time/latitude/longitude/altitude). Failed fixes are shown in red. The photoGPS software will
perform several passes, retrying the captures that originally produced failed fixes, as these
can sometimes be turned into successful fixes by using information from other fixes. In
addition, the application performs reverse geocoding, to try to provide an address for each
capture (street/town/country).
2. In the Photos Pane, select the source folder containing the photos you just offloaded from
your camera. The photos will be loaded and their thumbnails displayed. By default, the same
directory is used to store the geotagged photos. JPEGs are overwritten with geotagged
versions and RAW photos are given an XMP sidecar. If you prefer, you can select an
alternative destination folder for the geotagged photos.
GPS position fix information
- 7 -
is displayed in green