Managing Gps Captures - JOBO PHOTOGPS User Manual

10. Managing GPS Captures

When the device is connected to the computer, the photoGPS software displays the number of
captures currently stored on the device and the percentage of the total storage used.
The same information is accessible by pressing the 'Configure Device' button. This pops up a window
which includes a graphical display of the number of captures used and an estimate for the number
of captures remaining. The battery status, device identifier, firmware version and internal clock time
are also shown.
This window has an 'Erase All Data' button, which can be used to delete all the captures from the
device when they are no longer needed. The typical workflow is to geotag your photos, as described
earlier in the guide, then use this button to delete the captures from the device ready to start
taking new photos.
If you want to archive your GPS capture data you can bring up the 'Options' window (via the Tools ->
Options menu) and select the 'GPS Data' tab. Here you can choose a folder that captures will be
copied to when importing from the device.
- 12 -