Interface Setup; Backlight Setup - JOBO GIGA VU SONIC Manual

1. Interface Setup

Changing color of the system interface:
Under <Setup> on the main menu, select <Interface>
Right of "Direction" buttons to select your favorite colors. Press "Ok" to confirm
application of new colors.
Setting the picture as wallpaper:
Under <Setup> on the main menu, select <Interface setup>
Select your favorite picture file in the File Selecting Window.

2. Backlight Setup

Changing the automatic shutdown time of system backlight:
Under <Setup> on the main menu, select <Backlight Setting>
Left and Right of "Direction" buttons to change the shutdown time of backlight (the
time refers to the total time during which no button is operated). Press "Ok" button to
apply the new setting.
When the interval without any operation reaches the designated value, LCD backlight
will automatically shut down.
With the setting, you can:
• reduce consumption of battery power and prolong battery life. It is, therefore,
recommended that small value should be set for automatic shutdown time of
backlight when the unit is used in the open.
Changing luminance of system backlight:
Under <Setup> on the main menu, select <Backlight Setting>
Press Left and Right of "Direction" buttons to change the brightness of backlight.
Press "Ok" button to apply the new setting.
With the setting, you can:
• reduce consumption of battery power and prolong service time. It is, therefore,
recommended that small value should be set for luminance of backlight when
the unit is used in the open.
•
readjust luminance to adapt to the influence of different environment
31 von 363136
<Color>. Press Left and
<Wallpaper>.
<Off Time>. Press
<Brightness>.
31