Advertisement
Quick Links
HUANUO
Gas Spring
Desk
Thank you for choosing
strive to provide
the industry.
contact
us
at
Technical
Support:
(US/CA)I -800-556-0533
Other
Info:
support@huanuoav.com
Website:
www.huanuoav.com
Aluminum
Mount
Model:
this HI-JANI-JO product!
you with the best quality
Should you have any issues, please don't hesitate
LCD Monitor
Instruction
HNTS4B
Mon-Fri 8am - 8pm(CST)
Manual
At HI-JANI-JO we
products
and services
V5.O(A)
in
to
Advertisement
Related Manuals for HUANUO HNTS4B
Summary of Contents for HUANUO HNTS4B
- Page 1 Gas Spring Aluminum LCD Monitor Desk Mount Instruction Manual V5.O(A) Model: HNTS4B Thank you for choosing this HI-JANI-JO product! At HI-JANI-JO we strive to provide you with the best quality products and services the industry. Should you have any issues, please don't hesitate...
- Page 2 IMPORTANT SAFETY INFORMATION Please carefully read all instructions before attempting installation. If you do not understand the instructions or have any concerns or questions, please contact our Technical Support line at I —800-556—0533 or customer service support@huanuoav.com. CAUTION: Avoid potential personal injuries and property...
- Page 3 SUPPLIED PARTS HARDWARE Washer Bolt Bolt Spacer Bolt Steel M5x6 M4x12 M4x30 Washer 18x8.2x12.3 A (x8) E (x8) B (x8) c (x8) D (x8) Bolt I /8 in (3mm) Bolt DecorativeCap Hole Cover M8x16 mm SmallAllen Key M5x12 I (x5) K (x5) L (xl) 5/32 in (4mm)
- Page 4 Stepl Install the Base For Clamp Mounting —Measure the thickness Adjust the base according 2-1. Connect the pole of desktop to the thickness of desktop [T] to the base [S] Desktop For desktop with thickness within 0.79-3.15 (20-80 Recommened Desktop Thickness: 0.79-3.15 (20—80 mm)
- Page 5 For Grommet Mounting Detach the base [S] entirely Connect pole [T] to the desktop foot [b] Large Allen Key —Install base plate [R] and rubber Keep the rubber pad [e] and 4pcs pad [e] to desktop foot with 4pcs bolts preassembled bolts for next step when detaching...
- Page 6 Step 2 Secure the Arm Assembly to the Pole Assembly Step 2—1Slide the locating ring [Q], Step 2—2 Slide the two extension arms extension arm [Y I], locating ring [Q] and [Y 2] to the supporting part [X] and supporting part [X] in sequence to the tighten them using Allen key.
- Page 7 Step 3 Attach the VESA Plate [P] to the Monitor 3—2 Install Monitors and Laptop 3—1 Choose Proper bolts mount Arms Flat back monitor 1OOKI00mm 75*75mm Round back monitor 1OOx100mm 5x75mm Deskto Insert bolts through the washers and then put on the decorative covers.
- Page 8 Step 5 Adjustments Gas Spring Adjustment Tilt and Swivel Adjustments Swivel >T-.iA adj,ustment SWiveI Deskto Large Allen Key Tilt NOTE: Turn clockwise reduce tension lighter monitors and counter—clockwise increase tension heavier monitors. Keep adjusting until monitor can keep still at any postion.
Need help?
Do you have a question about the HNTS4B and is the answer not in the manual?
Questions and answers