Enabling GTP Decapsulation
Related Topics
Copyright © 2010, Juniper Networks, Inc.
Chapter 9: Configuring Additional Intrusion Detection and Prevention Features
To enable GTP decapsulation:
In the NSM Device Manager, double-click the IDP device to display the device
1.
configuration editor.
Click Sensor Settings.
2.
Click the Run-Time Parameters tab.
3.
Expand the Run-Time Parameters group.
4.
Select Enable GTP decapsulation support.
5.
Click OK.
6.
Configuring Additional Intrusion Detection and Prevention Features Overview on page 111
NSM and Intrusion Detection and Prevention Device Management Overview on page 5
113