Juniper NETWORK AND SECURITY MANAGER 2010.3 - CONFIGURING INTRUSION DETECTION AND PREVENTION GUIDE REV1 Manual page 116

Configuring intrusion detection and prevention devices guide
Table of Contents

Advertisement

Configuring Intrusion Detection and Prevention Devices Guide
Table 51: IDP Device Configuration: Protocol Thresholds and Configuration Settings (continued)
Setting
Description
IRC
Maximum Password length –Raises a protocol anomaly if IDP detects an Internet Relay Chat (IRC) password
containing more bytes than the specified maximum. The default is 16 bytes.
Maximum Username length–Raises a protocol anomaly if IDP detects an IRC username containing more
bytes than the specified maximum. The default is 16 bytes.
Maximum Channel length–Raises a protocol anomaly if IDP detects an IRC channel name containing more
bytes than the specified maximum. The default is 64 bytes.
Maximum Nickname length–Raises a protocol anomaly if IDP detects an IRC nickname containing more
bytes than the specified maximum. The default is 16 bytes.
100
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Network and security manager 2010.3

Table of Contents