C h a p t e r T h r e e
O
P E R AT I O N
Turning the TV On and Off
Press the Power button.
You can also use the POWER button on the front panel.
Plug & Play Feature
When the TV is initially powered On, basic customer settings proceed
automatically and subsequently: Setting the language, Antenna input
check, Channel Memorize and Time Setting.
Note : The Plug & Play function operates after plugging in the TV
for the first time.
1
Press the Power button on
the remote control.
The message "Menu lan-
guage channels and time
will be set." is displayed.
Press the ENTER button,
then 'Setting Language of
OSD' menu is automatically
displayed.
2
Press the ENTER button to
enter the language.
Press the ▼ button to
select language, then
the ENTER button.
'Ant. input check' menu is
automatically displayed.
3
Press the ▼ button to
memorize the channels of
the selected connection.
Press the ENTER button to
select "Start".
When selecting Cable TV :
Press the ▼ button to
select "Cable", then press
the ENTER button.
Press the ▼ button to
cycle through these
choices:
"STD", "HRC" or "IRC".
Menu language, channels,
and time will be set.
Start
Setting language of the OSD
Menu Language
: English
Spanish
French
Select the antenna connection
ANT A
ANT B
Air
None
Cable
None
Air
Cable
Cable
Air
Select the antennas to memorize
ANT A
Start
ANT B
Start
ANT A + ANT B
Start
continued...
ANT A : Air
Air
None
Cable
None
ANT A : Cable
Air
Cable
ANT A : Air, ANT B : Cable
Cable
Air
ANT A : Cable, ANT B : Air
27