Disarming The Vrs - Directed Electronics 10 Owner's Manual

Directed electronics state-of-the-art vehicle security system owner's guide 10

Table of Contents

Fifteen seconds

change to a continuous blast.

From this point on, when the ignition key is turned off, the VRS

will immediately turn on the starter kill. This will prevent the

vehicle from being restarted, thus immobilizing it at that spot.

after the constant siren output begins, the flashing

Three minutes

parking lights and the siren will stop. The starter kill will remain

active until the system is disarmed. If the door is opened or the

ignition is turned off and on in an attempt to restart the car, the

siren and light flashing will begin again.

➜

disarming the vrs

Take the time to familiarize yourself with the VRS

quence and the disarm procedure. It is important to recognize

and identify the VRS

it in case of accidental activation.

Once the VRS

must disarm it the next time you operate the vehicle. You must

disarm it with one of the following procedures:

If the system has not entered the triggered sequence (siren has

not started chirping):

1. Turn the ignition on.

2. Press

after the siren chirps begin, the siren's output will

trigger sequence and know how to disarm

is armed, it does not disarm automatically. You

on the transmitter for one second. The

lights will flash and the siren will chirp twice.

triggering se-

Table of Contents

Clifford 10