Table of Contents
Advertisement
JUNOS 10.1 Software Release Notes
Layer 2 and Layer 3 Protocols
Infrastructure
User Interface and Configuration
Related Topics
Limitations in JUNOS Release 10.1 for EX Series Switches
This section lists the limitations in JUNOS Release 10.1R2 for EX Series switches.
188
Limitations in JUNOS Release 10.1 for EX Series Switches
EX Series switches now support the
command.
The
option is not available in the
iso
supported on EX Series switches.
On EX Series switches, the
hierarchy is now supported, allowing explicit configuration of SIP server addresses
for DHCP servers.
On EX3200 switches and EX4200 switches, the
command and the
other-routing-engine
command are disabled.
The output of the
show chassis hardware
EX4200 switches has been changed. The Description field in the output now
displays SFP-100-LX40 for the 100Base-LH interface and SFP-100-LH for the
100Base-ZX interface.
If you enable PIM on all interfaces using the
enabled on the
me0
and
vme
to explicitly disable PIM on the management interfaces. Previously, enabling
PIM on all interfaces caused it to be enabled on these management interfaces.
New Features in JUNOS Release 10.1 for EX Series Switches on page 184
Limitations in JUNOS Release 10.1 for EX Series Switches on page 188
Outstanding Issues in JUNOS Release 10.1 for EX Series Switches on page 191
Resolved Issues in JUNOS Release 10.1 for EX Series Switches on page 194
Errata in Documentation for JUNOS Release 10.1 for EX Series Switches on
page 198
Upgrade and Downgrade Issues for JUNOS Release 10.1 for EX Series Switches
on page 198
show multicast rpf instance instance-name
command because it is not
show pfe route
statement in the
sip-server
request system power-off
request system power-off both-routing-engines
command for EX3200 switches and
interface all
interfaces by default. Therefore you do not need
[edit system services dhcp]
command, it is not
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOS 10.1 - RELEASE NOTES 5-13-2010 and is the answer not in the manual?