Juniper JUNOS 10.1 - RELEASE NOTES 5-13-2010 Release Note page 169

Errata and Changes in Documentation for JUNOS Release 10.1 for SRX Series Services Gateways and J Series Services Routers
user@host#
Range: 1 – 60 seconds
Default: 1 second
The JUNOS Software CLI Reference incorrectly states the
and
The IDP rule notification options listed in the JUNOS Software Security
Configuration Guide incorrectly include the
which are not supported in JUNOS Release 10.1.
Errata and Changes in Documentation for JUNOS Release 10.1 for SRX Series Services Gateways and J Series Services
set security idp security-package automatic download-timeout
clear security idp status logs, whereas the logs should be as follows:
Correct show security idp status
user@host> show security idp status
State of IDP: 2-default, Up since: 2010-02-04 13:37:16 UTC (17:15:02 ago)
Packets/second: 5 Peak: 11 @ 2010-02-05 06:51:58 UTC
KBits/second : 2 Peak: 5 @ 2010-02-05 06:52:06 UTC
Latency (microseconds): [min: 0] [max: 0] [avg: 0]
Packet Statistics:
[ICMP: 0] [TCP: 82] [UDP: 0] [Other: 0]
Flow Statistics: ICMP: [Current: 0] [Max: 0 @ 2010-02-05 06:49:51 UTC]
TCP: [Current: 2] [Max: 6 @ 2010-02-05 06:52:08 UTC]
UDP: [Current: 0] [Max: 0 @ 2010-02-05 06:49:51 UTC]
Other: [Current: 0] [Max: 0 @ 2010-02-05 06:49:51 UTC]
Session Statistics: [ICMP: 0] [TCP: 1] [UDP: 0] [Other: 0]
Policy Name : sample
Running Detector Version : 10.2.160091104
Correct clear security idp status
user@host> clear security idp status
State of IDP: 2-default, Up since: 2010-02-04 13:37:16 UTC (17:13:45 ago)
Packets/second: 0 Peak: 0 @ 2010-02-05 06:49:51 UTC
KBits/second: 0 Peak: 0 @ 2010-02-05 06:49:51 UTC
Latency (microseconds): [min: 0] [max: 0] [avg: 0]
Packet Statistics: [ICMP: 0] [TCP: 0] [UDP: 0] [Other: 0]
Flow Statistics: ICMP: [Current: 0] [Max: 0 @ 2010-02-05 06:49:51 UTC]
TCP: [Current: 0] [Max: 0 @ 2010-02-05 06:49:51 UTC]
UDP: [Current: 0] [Max: 0 @ 2010-02-05 06:49:51 UTC]
Other: [Current: 0] [Max: 0 @ 2010-02-05 06:49:51 UTC]
Session Statistics: [ICMP: 0] [TCP: 0] [UDP: 0] [Other: 0]
Policy Name: sample
Running Detector Version: 10.2.160091104
The Verifying the Policy Compilation and Load Status section of the JUNOS
Software Security Configuration Guide has a missing empty/new line before
the IDPD Trace file heading, in the second sample output.
The JUNOS Software Security Configuration Guide incorrectly states that IDP
is not supported in transparent mode on SRX3400, SRX3600, SRX5600, and
SRX5800 devices. IDP is supported in transparent mode on those devices.
show security idp status
log
log
and
Send Emails Run Scripts
options,
169
Routers