Table of Contents
Advertisement
Target Installing Deep Freeze
Complete the following steps to remotely install a Full Workstation Installation on any workstation
that has the Workstation Seed installed.
1. Right-click on one or multiple workstations and select Install, as shown below.
2. A dialog box appears, asking if the installation should proceed.
Click OK.
A dialog box appears to select the file to be installed on the remote workstation.
3. Select the installation file to use and click Open.
4. The workstation installs Deep Freeze and restarts.
5. Once the installation is complete, The Enterprise Console reflects the change in the
workstation's status, and shows it as Frozen.
2
Advertisement
Table of Contents
