Table of Contents
Advertisement
Example - Multiple Subnets Remote Control Enabled Console
In this environment the clients are again located across multiple subnets. In this case, more than one
console is being used. There are two methods that allow multiple consoles to be used: a Server Service
or a Remote Control Enabled (RCE) console. In this example, an RCE console is used. The following
diagram shows the network topology:
Subnet 1
In this scenario, the clients and the RCE console use the same port. Looking at the above diagram,
three other consoles connect to the RCE console in order to see the clients. To ensure these consoles do
not conflict with the RCE console (Port A), they are created under a different port (Port B).
0
Subnet 2
Advertisement
Table of Contents
