Power noise filters for use with audio-video equipment (9 pages)
Summary of Contents for Taga Harmony TS Series
Page 1
We strongly advise to contact a professional installer or dealer in order to install TAGA Harmony products We recommend using high quality TAGA Harmony speaker cables and other installa- tion accessories. Achieve Glorious Acoustics Series I-SOURCE SPEAKER SELECTORS Your product is marked with the symbol as showed on the left.
Page 2
Replacement Parts - When replacement parts are TAGA Harmony Speaker Selector is a device which is an efficient, cost-effective way of instructions should be read before the product is required, be sure the technician has used replacement expanding your audio system at home or office. TAGA Harmony Speaker Selector...
Page 3
Hooking Up Speaker Cables to Terminals Front Rear Panel The speaker terminals can accommodate up to 14 AWG speaker cables. 14 AWG speaker cable is recommended for longer connections (greater than 20 meters / 66 feet). For shorter lengths you can use 16 or 18 AWG speaker cables. It is recommended to leave about 150 cm (5 feet) of extra cable at the speaker selector to facilitate positioning and installation of the speaker selector.
Page 4
Operation I . Make sure your audio source (amplifier, receiver etc.) is switched off. 2. Make sure that the volume regulator on your audio source is set on minimum 3. Switch OFF all Zones on the Speaker Selector (Zone Selectors in the top position) 4.
Need help?
Do you have a question about the TS Series and is the answer not in the manual?
Questions and answers