Canon SELPHY CP600 Printer Software Manual page 27

For windows
Hide thumbs Also See for SELPHY CP600:
Table of Contents

Advertisement

Ink cassette is empty and must be replaced.
Press [Resume] to resume, or [Cancel] to stop.
Cause :
There is no more ink in the ink cassette.
Correction : Replace the ink cassette with a new one.
In the following cases, the number of prints specified for the installed
Color Ink/Paper Set may not be obtained:
• If printing has been interrupted in progress
• If the ink sheet has been wound too tightly (while removing slack
from the ink sheet)
Ink cassette not installed.
You must insert an ink cassette before printing.
Press [Resume] to resume, or [Cancel] to stop.
Cause :
The ink cassette is not inserted into the printer.
Correction : Insert the ink cassette into the printer.
The printer is not ready for printing.
Check the printer power and printer connections.
Cause :
No power is supplied to the printer.
Correction : Turn the printer on.
Cause :
The USB cable is not connected correctly.
Correction : Check the USB cable to make sure it is connected correctly.
No Paper Cassette has been found.
Insert an appropriate one.
Press [Resume] to resume, or [Cancel] to stop.
Cause :
The paper cassette is not inserted.
Correction : Insert the paper cassette into the printer.
27

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cp printer solution disk version 4

Table of Contents