Chapter 4 Login To The Switch; Login; Configuration - TP-Link TL-SL5428E Quick Installation Manual

24-port 10/100mbps + 4-port gigabit l2 managed switch

Hide thumbs Also See for TL-SL5428E:

Table of Contents

Chapter 4 Login to the Switch

1) To access the configuration utility, open a web-browser and type in the

default address http://192.168.0.1 in the address field of the browser, then

press the Enter key.

Note:

To log in to the Switch, the IP address of your PC should be set in the same

subnet addresses of the Switch. The IP address is 192.168.0.x ("x" is any

number from 2 to 254), Subnet Mask is 255.255.255.0.

For the detailed instructions as to how to do this, please refer to Appendix B in

the User Guide on the Resource CD.

2) After a moment, a login window will appear, as shown in Figure 4-2. Enter

admin for the User Name and Password, both in lower case letters. Then

click the OK button or press the Enter key.

After a successful login, the main page will appear as Figure 4-3, and you can

configure the function by clicking the setup menu on the left side of the screen.

Figure 4-1 Web-browser

Figure 4-2 Login

Table of Contents