Advertisement
About the USB connection
• When using a USB cable to connect the Clavinova to your computer, make the connection directly without passing
through a USB hub.
• Do not turn the power to the Clavinova on or off while the USB-MIDI driver is running.
• The Clavinova will begin transmission a short time after the USB connection is established.
• Depending on the state of your computer, the operating state of the Clavinova may become unstable. Do not use your
computer in a way that causes it to enter an unstable state.
• If you are using Windows 2000, problems may occur on your computer when your computer starts up. In this case, turn
on the power of the Clavinova when your computer is running.
CAUTION
• If you turn the power of the Clavinova on/off or connect/disconnect the USB cable in the following states, prob-
lems will occur in the computer system, possibly causing it to "freeze" (hang up), or causing the Clavinova to stop
functioning.
– While installing the driver
– While starting-up or shutting-down the operating system
– While your computer is suspended (sleeping)
– While a MIDI application is running
• Performing the following actions may cause your computer to hang up or the Clavinova to stop functioning.
– Frequently turning the power on/off or connecting/disconnecting the cable
– Shifting to power-conservation (sleep) mode while MIDI data is being transferred, or returning from sleep mode
– Connecting/disconnecting the cable while the power of the Clavinova is on
– Turning the power of the Clavinova on/off, starting up your computer, or installing the driver while a large amount of
data is being transferred
Previous page
Table of Contents
What is MIDI?
Possibilities
Connections
Glossary
14
Next page
Software
Advertisement
