Parameters (Vc+Tube+Rotor 4) - Kurzweil K2661 Musician’s Reference Manual

VC+Tube+Rotor 4 faithfully models the response and smooth distortion caused by overloading a vacuum
tube circuit.

Parameters (VC+Tube+Rotor 4):

Page 1 (VC+Tube+Rotor 4)
In/Out
VibChInOut
Vib/Chor
Roto InOut
Page 2
Xover
Lo Gain
Lo Rate
Lo Size
Lo Trem
Page 3
LoMicA Pos
LoMicA Lvl
LoMicA Pan
HiMicA Pos
HiMicA Lvl
HiMicA Pan
Page 4
LoResonate
Lo Res Dly
LoResXcurs
ResH/LPhase
In/Out When set to In, the algorithm is active; when set to Out the algorithm is bypassed.
In/Out Gain The overall gain or amplitude at the input or output of the effect. For distortion, it is often
necessary to turn the output gain down as the distortion drive is turned up.
VibChInOut When set to In the vibrato/chorus is active; when set to Out the vibrato/chorus is
bypassed.
Vib/Chor This control sets the Hammond B3 vibrato/chorus. There are six settings for this effect:
three vibratos V1, V2, and V3, and three choruses C1, C2, and C3.
In or Out
In or Out
V1
In or Out
8 to 25088 Hz
Off, -79.0 to 24.0 dB
-10 to 10 Hz
0 to 250 mm
0 to 100%
-180.0 to 180.0 deg
0 to 100%
-100 to 100%
-180.0 to 180.0 deg
0 to 100%
-100 to 100%
0 to 100%
10 to 2550 samp
0 to 510 samp
0.0 to 360.0 deg
In Gain
Out Gain
Tube Drive
Cabinet LP
Hi Gain
Hi Rate
Hi Size
Hi Trem
Hi Beam W
LoMicB Pos
LoMicB Lvl
LoMicB Pan
HiMicB Pos
HiMicB Lvl
HiMicB Pan
HiResonate
Hi Res Dly
HiResXcurs
KDFX Reference
KDFX Algorithm Specifications
Off, -79.0 to 24.0 dB
Off, -79.0 to 24.0 dB
Off, -79.0 to 60.0 dB
8 to 25088 Hz
Off, -79.0 to 24.0 dB
-10 to 10 Hz
0 to 250 mm
0 to 100%
45.0 to 360.0 deg
-180.0 to 180.0 deg
0 to 100%
-100 to 100%
-180.0 to 180.0 deg
0 to 100%
-100 to 100%
0 to 100%
10 to 2550 samp
0 to 510 samp
10-127