Controller; Pitch Bend; Aftertouch; Notes Off - Kurzweil MARK 12 V2.0 - ADDENDUM User Manual

KURZWEIL MARK 12 USER'S GUIDE ADDENDUM
RECORDER Event Editor

CONTROLLER

Controllers represent the virtual controls that the Mark 12 uses to adjust the music you
hear. Examples are Volume, Stereo Pan, Sustain Pedal, Soft Pedal. The display shows the
Controller name and an associated value. You can change the Controller value using the
Menu (see pages 89, 90 and 111 in your User's Manual for further information).

PITCH BEND

Pitch Bend reflects the use of the pitch ribbon. Values greater than zero are raised pitch,
negative values are lowered pitch. The range of pitch bend is -8192 to 8192. You can
change the Pitch Bend value using the Menu.

AFTERTOUCH

This is a MIDI event not generated by the Mark 12. It might appear in music imported
from a disk file.
TEMPO
This event sets the tempo of the song in beats per minute (BPM). You can change the
Tempo value using the Menu.

NOTES OFF

This event terminates all sounds on the track. This is used around punch-in sections and
at the end of tracks to turn off sounding notes.

LOOP

A track recorded with the Loop button will have this event at its end to tell the Recorder
to repeat the music.

TRACK END

A track recorded with the Record button will have this event at its end to tell the recorder
to stop play.
910320
15