Download Print this page

Advertisement

Quick Links

Easy Instructions for the Mark 10/110/150

by Jim Martinez (updated 3/25/99)
PLEASE NOTE: ¥Sections are labeled in bold, white (i.e. TEMPO, STYLE
SELECT, etc.) ¥Please refer to the manual for description of functions.
1. Check current version of Operating System ¥Find the MIDI button (in
OPTIONS section). ¥While holding down the MIDI button (with your right
hand), press the lowest white key (A) with your left hand. As of 11/18/96,
current operating system for the Mark 10/110/150 is version 2.07. If your
version says '2.00' or less, please contact your dealer.
2. Choosing a sound (example) ¥Press the ORCHESTRA button (in SOUND
SELECT section) ¥For an additional sound, press the VARIATION button.
There are a total of 80 preset sounds in this section. Note 6 additional sounds
(basses) in the LEFT SPLIT section.
2b. Great sounds (example) ¥Press the ORCHESTRA button (in SOUND
SELECT section). ¥Play the lower notes with a light touch, then strike harder
to hear the timpani AND the strings.
3. Layering preset sounds (example) ¥While holding down the GRAND
PIANO button (in SOUND SELECT section), press the STRINGS 2 button and
then let go of both. ¥Play.
3a. To lower volume of the second instrument ¥While holding down the
GRAND PIANO button (in SOUNDS section), press the STRINGS 2 button
six times and then let go of both. ¥Play.
3b. Create a keyboard split with bass and another instrument ¥Press any of the
four bass presets (in LEFT SPLIT section). ¥Press any instrument located in the
SOUNDS section.
3c. Create a keyboard split with non-bass sounds ¥While holding the
CUSTOM button (in LEFT SPLIT section), press any instrument located in the
SOUNDS section and let go of buttons. Your selection is now set to play on
left side of keyboard. ¥Simply press any instrument in SOUNDS section to set
right split. This selection can also be a layer of two sounds (see #3).
3d. To change the split point ¥At the same time, press the two buttons above
the SPLIT POINT label (in LEFT SPLIT section). ¥Press key to determine the
split between the two sounds.
4. Choosing a musical style (example) ¥Press the Bossanova button (in STYLE
SELECT section). ¥Press the START/STOP button (in STYLE SELECT section)
to listen. ¥Press the VARIATION or FILL TO VARIATION buttons to hear a
second version.

Advertisement

loading

Summary of Contents for Kurzweil MARK 10 - EASY

  • Page 1 Easy Instructions for the Mark 10/110/150 by Jim Martinez (updated 3/25/99) PLEASE NOTE: ¥Sections are labeled in bold, white (i.e. TEMPO, STYLE SELECT, etc.) ¥Please refer to the manual for description of functions. 1. Check current version of Operating System ¥Find the MIDI button (in OPTIONS section).
  • Page 2 ¥Begin playing ¥Press the PUNCH IN or the STOP button again to STOP rerecording. 6. Erase all existing songs in Kurzweil's RECORDER section ¥Find the MIDI button (in OPTIONS section). ¥While holding down the MIDI button (with your left hand), press the highest white key (C) with your right hand. All lights on the keyboard will flash and momentarily turn off.
  • Page 3 D above middle C to raise key (or the B below to lower key). If you have further questions, contact your dealer or: Kurzweil Clinician, Jim Martinez e-mail: itmsjim@cwo.com web site: www.cwo.com/~itmsjim/ voice: 253/589-3200 x 239...

This manual is also suitable for:

Mark 110 - easyMark 150 - easyMark 10