Macro Modes - Kurzweil K2500 - PERFORMANCE GUIDE REV F PART NUMBER 910251 CHAP 13 Manual

DiskMode||||Samples:12313K||Memory:102K|
Path|=|\CYBER\||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
CurrentDisk:SCSI|2||||||||Startup:Off|||
||||||||||||||||||||||||||Library:Off|||
Direct|Access,|84MB|||||||||||||||||||||
Psyquest|PS-427||||||||XMC1.7|||||||||||
<more|||Load|||Save||Macro||Delete|more>
The following screen is what you will see if Macro recording is Off:
Func:MACRO|||||[|Off||]||||||Index:|||0|
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
Select|Modify||Load||Record||On||||Exit|
The top line displays the disk function ,
Func:MACRO
the current Macro mode,
|[|Off||]||
and an index value into the Macro Table.
|Index:|||0|

Macro Modes

The K2500 has 3 Macro modes -- Record, Pause, and Off. The meaning of each of these modes
is:
There is no Macro object in the K2500 memory.
Off
Record A Macro object exists, and the K2500 records any file load operations that occur.
Pause A Macro object exists, but the K2500 does not record any file load operations that occur.
Note that whenever the Macro mode is Off, there are two soft buttons labeled Record and On.
Pressing On will enable Macro Record mode, and then will return to the Disk Mode page. As
an alternative, pressing Record will also enable Macro Record mode, but the display will
remain on the Macro page. Once you press Record, the soft buttons and the top line of the
display will change. The screen will look like this:
Disk Mode
Macros
13-39