Kurzweil K2500 - PERFORMANCE GUIDE REV F PART NUMBER 910251 CHAP 12 Getting Started Manual page 47

When an Arrangement is PLAYING, the three dashes on the MAIN page are replaced with the
ID# of the Song currently being played (or triggered) in the Arrangement, and the number of
the current Step.
The square Track Mode Indicators will flash when MIDI data is present on the tracks during
play back of an arrangement. The actual track data playing back is supplied by the Songs
entered into the steps of an arrangement.
EditSong:ARRANGE|||||||||<>Step:4/5|||||
Step|:4|||||||||||||||||||||||||||||||||
Song|:0|None||||||||||||||||||||||||||||
Mutes:----|----|----|----|||||||||||||||
Xpose:0st|Times:1x||Mode|:Next||||||||||
||||||||||||||||||||||||||||||||||||||||
LoKey:Off|HiKey:Off|Latch:Off|VelTrk:On|
Add||||Delete|SetRng|Play|||Stop|||Done|
PARAMETER
STEP
SONG
MUTES
XPOSE
TIMES
MODE
LOKEY
HIKEY
LATCH
VELTRK
The first number displayed in the Step field on the top line is the current step. The second
number is the total amount of steps in the arrangement. The current step in the screen above,
for example, is the fourth step in an arrangement consisting of five steps. Use the CHAN/
BANK buttons to select the current step for editing.
Step
The number of steps in an arrangement defaults to 1. All other steps are then added when
needed. The step of the Arrangement selected for editing is displayed as the Step. Use the
CHAN/BANK arrows to select the different steps in your Arrangement. StartStep on the
EditSong: COMMON page (see page 12-25), as well as the key ranges of the steps, control what
steps are played. The behavior and control of each step is defined with the parameters
described below.
Song
The Song is the ID# and name of a Song Object in memory that will play back in proper
numerical order with the other steps in an arrangement or will respond to any triggering from
a defined keyboard range in that step. This song's (up to) 16 tracks will play in addition to any
tracks in the current song.
Mutes
The possible sixteen tracks of the current step's Song can be individually muted. When the
selected step's display has tracks with an (M) in this field, those tracks will be muted during
playback of the Song in the Arrangement.
Xpose
Each Step in an Arrangement can impose a transposition on the Song selected in its Song
parameter during playback. Xpose determines how many semitones a Step's Song is
RANGE OF VALUES
1 – 99
ANY SONG IN MEMORY
- , M
-128ST – 127ST
1X – 120X, INFINITE
NEXT, STOP
C-1 – G9, OFF
C-1 – G9, OFF
ON, OFF
ON, OFF
Edit Song: ARRANGE Page
DEFAULT
1
0 NONE
- (NOT MUTED)
0ST
1X
NEXT
OFF
OFF
OFF
ON
Song Mode
12-47