Kurzweil K2500 - PERFORMANCE GUIDE REV F PART NUMBER 910251 CHAP 12 Getting Started Manual page 3

2. Use the down arrow button to move the cursor to the Program field.
When this field is highlighted, type "52" then press the ENTER button. You've now
assigned "Jazz Kit" to channel 1.
SongMode:MAIN||Events:186K|||STOPPED||||
CurSong:1|NewSong||||||||||||Tempo:120||
RecTrk|:1||||Vol:127|Pan:64||Mode|:Merge
Program: 52|Jazz|Kit||||||||||Locat:||1:1
||||||||||||||||||||||||||||||||||||||||
Track||:R|-|-|-|-|-|-|-|-|-|-|-|-|-|-|-|
Channel:1|2|3|4|5|6|7|8|9|10111213141516
Record| |Play|| |Stop|| Erase| |MISC|| MIXER|
NOTE: If "52 Jazz Kit" appears in parentheses, it means that the current channel is not a drum channel.
You can either go to the Master page to change the drum channel, or assign the drums to a current drum
channel in Song mode.
3. Now use the up arrow button to highlight the RecTrk field.
Change RecTrk to "2". You can use either the alpha wheel or the keypad.
4. Return to the Program field, and set it to "80 Mix Bass".
SongMode:MAIN||Events:186K|||STOPPED||||
CurSong:1|NewSong||||||||||||Tempo:120||
RecTrk|:2||||Vol:127|Pan:64||Mode|:Merge
Program: 80|Mix|Bass||||||||||Locat:||1:1
||||||||||||||||||||||||||||||||||||||||
Track||:-|R|-|-|-|-|-|-|-|-|-|-|-|-|-|-|
Channel:1|2|3|4|5|6|7|8|9|10111213141516
Record||Play|||Stop||Erase||MISC||MIXER|
Notice that the "R" on the Track line, which stands for "Record", has moved to track 2. Also
notice how each of the sixteen tracks has a default channel associated with it. You could
change this if you wanted to, but most people find it easiest to associate track 1 with
channel 1, track 2 with channel 2, etc.
5. Repeat the above two steps to assign "97 Gospel Organ" to channel 3 and "46 Brt Saxy
Lead" to channel 4.
You've now chosen the programs for your first sequence. It's important to realize, though,
that you have not recorded them yet. They will be there when you need them, but they
have not yet been included in a song. Also, don't forget that you can change the program
assignments any time before or after you record the song.
Record a Drum Loop
Our song will be based around a four measure drum loop that we'll record now. Then, a little
later on, we'll "unloop" the drum track and really start jamming.
The length of the drum loop is determined by the current endpoint, so we'll start by recording 4
measures of silence to set the endpoint.
Song Mode
Getting Started with the Sequencer
12-3