Kurzweil K2500 - PERFORMANCE GUIDE REV F PART NUMBER 910251 CHAP 12 Getting Started Manual page 11

MAIN Page
The Song Mode MAIN Page allows real time recording and playback, song and track selection.
From this page you can view and edit the tracks' channel, program, volume and pan settings, as
well as other useful items.
PARAMETER
CURRENT SONG
RECORD TRACK
PROGRAM
SETUP
TRACK STATUS
CHANNEL
VOLUME
PAN
TEMPO
MODE
LOCATION
The Events field on the top line displays the amount of free RAM space. 317 K in the above
example represents maximum available memory with P/RAM installed. The maximum is 60 K
without P/RAM. This field is replaced by the Used field, as shown below, when the Song
Status is REC READY or RECORDING, to display the percentage of the record buffer (not the
RAM memory) being used.
Song Status, also on the top line of the display, will be one of the following:
•
•
•
•
•
SongMode:MAIN||Events:317K|||STOPPED||||
CurSong:1|NewSong||||||||||||Tempo:120||
RecTrk|:1||||Vol:127|Pan:64||Mode|:Merge
Program:2|Stereo|Grand|||||||Locat:||1:1
||||||||||||||||||||||||||||||||||||||||
Track||:R|-|-|-|-|-|-|-|-|-|-|-|-|-|-|-|
Channel:1|2|3|4|5|6|7|8|9|10111213141516
Record||Play|||Stop||Erase||MISC||MIXER|
SongMode:MAIN||Used:||0%|||REC|READY||
STOPPED is displayed whenever the sequencer is not in another status, or when the
Stop or Pause button is pressed.
is displayed when the Play button is pressed (assuming Record has not
PLAYING
been previously pressed; and Key Wait is Off and the Clock set to
Internal)
REC READY is displayed when the Record button is pressed while the sequencer is
STOPPED. It flashes, indicating that it is waiting to start recording.
RECORDING is displayed when the Play button is pressed while REC READY is
flashing (unless Key Wait is On or the Clock is set to Ext). RECORDING
will also be displayed if the Record button is pressed while the status is
PLAYING.
KEY WAIT is displayed when the Play button is pressed, if the KeyWait parameter
on the MISC page is set to On. It will go this status from both the
STOPPED and REC READY status. It flashes, indicating it is waiting for a
key to be struck to start recording or playing.
RANGE OF VALUES
SONG ID & NAME
1 – 16, NONE, MULT
PROGRAM ID & NAME
SETUP ID & NAME
- (EMPTY), R, M, P
1 – 16
0 – 127
0 – 127
1 – 255 BPM
MERGE, ERASE
1:1 – 9999:9
DEFAULT
1 NEWSONG
1
CURRENT PROGRAM
CURRENT SETUP
- (EMPTY)
1 – 16
127
64
120 BPM
MERGE
1:1
Song Mode
MAIN Page
12-11