Kurzweil K2500 - PERFORMANCE GUIDE REV F PART NUMBER 910251 CHAP 12 Getting Started Manual page 24

Song Mode
MIX Page
Once a track contains data, it will have a (P) as a Track Status Indicator, and it will be played
during playback. You now will be able to toggle between Play (P), Mute (M), and Record (R).
The track selected as the RecTrk will have an (R) in this field, designating it as the record
enabled track. If the RecTrk is set to Mult, then all of the empty tracks will have Record (R) as
their Track Status Indicator. If RecMode is not set to Mult and there isn't a track with an (R) in
this field, the RecTrk parameter's value will be None. If you are in Multi record mode, and have
turned all record enabled tracks (R) back to empty (-) so that there isn't a track with an (R) in
this field, the RecTrk will remain set to Mult.
Quick Mute Track Bank Indicator
This parameter appears as an underscore directly below the graphics for either the bank of
tracks 1 -8 or tracks 9 - 16. It indicates which bank of eight tracks will respond to the Quick
Mute feature, described with the Tr 1-8/9-16 soft buttons, below.
Soft Buttons on the MIX Page
Record, Play(Pause), and Stop work the same as they do on the MAIN page, described earlier.
Tr 1-8 / (Tr 9-16): The eight mode select buttons to the left of the screen on the front panel of the
K2500 (PROGRAM - DISK) are used as Track Mutes when on the MIX page. For example, press
the SETUP button to mute track 2; notice that its track status indicator changes to "M." Each of
these buttons has a LED to indicate that the corresponding track is being muted, but since there
are sixteen tracks and only eight buttons, this soft button will select, and display, the bank of
eight tracks that can be muted in this fashion.
Press the Tr 1-8 soft button to toggle the Quick Mute Track Bank Indicator under tracks 1 -8 or
tracks 9 - 16, selecting which bank of eight tracks will respond to the Quick Mute feature.
Keep: If you have made any changes to the initial program, volume or panning of a track on the
MIX page, press Keep to prompt this dialog:
Press Yes if you are sure you want to update the initial program change, MIDI volume, and pan
settings for tracks already containing data in the current Song, to the new values you just made
on the MIX page. The settings will be modified and you are returned to the MIX page. Press No
to abort the updating of the initial program change, MIDI volume and pan settings for the
current Song.
MAIN returns you to the MAIN page.
12-24
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
Update|initial|prog/vol/pan?||||||||||||
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
|||||||||||||||||||||||||||||Yes||||No||