Names And Functions Of Ter Minals - Eclipse CD 5425E Installation Manual

Names and functions of ter
Names and functions of ter
• Never cut the insulation on the power cable or use it to power any other equipment. If the rated current
capacity of the power cable is exceeded, fire and electric shocks may result.
• The cables should be secured with tape or a similar securing method to prevent any obstructions while
driving. If they get wound or entangled around components such as the steering wheel, shifting lever,
or brake pedal, accidents may result.
• If removing the end of the cord to connect to another cord, be sure to wrap PVC tape or a similar wire
insulating method around the connection to insulate it. If the connection is not insulated, fire or
accidents may result.
INTERCONNECTING CABLE
2
(Power and speaker connector)
Tip*1
Tip*1
• The positions of the B+ and ACC pins on the connector may vary
depending on the vehicle. In such cases, replace the end of the
connector. Ask your dealer for details on connector pin positions.
Tip
• This illustration shows the CD8445E. The CD5425E differs slightly from this illustration.
• Refer to page 5 for details on the wire colours and connection points for interconnecting cables
• Refer to page 5 for details on connection points
terminals.
MAIN UNIT
1
ANTENNA PLUG
16P
A
4
3
A
- 4 -
minals
minals
E
D
1
TO VEHICLE-SIDE
CONNECTOR
2
to for the main unit cables and
E
C
B
.
2