ZyXEL Communications PM5311-T0 Quick Start Manual

ZYXEL
GPON VoIP Bridge
Quick Start
Hardware Connections
Connect the fiber optic
the PON port.
Warning! To avoid possible
injury, do NOT look into an
operating fiber-optic
connector.
Connect a computer
port using the yellow
cable.
Connect a phone to the VOIP port
using a phone cable.
Connect the power adapter
the PM5311-TO and press the
ON/OFF button in.
Make sure the LEDs are
check the status.
1/2
Guide
cable to
eye
module's
to the 2.5GbE
Ethernet
to
on and
PM5311-TO
ONT with 2.5GbE
US Importer: Zyxel Communications,
1180 North Miller Street
https://www.zyxel.com/us/en/
Copyright @2022 Zyxel and/ or its affiliates.
p ON 2.5GbE VOIP
O
O O
INTERNET
PON
LAN
LAN
Inc
Anaheim, CA 92806-2001
All Rights Reserved
ON
POWER
O
On - Power is on.
Blinking - Starting up.
Off - Power off.
Blinking - Upgrading firmware.
Red
On - PON connection ready.
Blinking - Trying to link
Off - Link off.
on - 2.56, 1000/100 Mbps
Blinking - Transmitting/receving
Off - Link down.
Blue On - SIP account registered.
Blinking - Telephone off-hook
Off - SIP account not registered.
up.
link up.
data.
Ready.
or incoming call.