Linksys SRW224P - 10/100 - Gigabit Switch User Manual page 33

Wireless-G Access Point with Power Over Ethernet and Rangebooster
QoS
The following options are VLAN global settings for the Access Point.
Default CoS (Priority). Select Enabled if you want to assign a default CoS value to each SSID. This option is
automatically enabled when the VLAN option is enabled. The default is Disabled.
U-APSD (Unscheduled Automatic Power Save Delivery). This option is only available when WMM is enabled
on any of the SSIDs. Select Enabled if you want client devices with U-APSD capability to take advantage of the
power save mode. The default is Disabled.
SSID Name. Displays the SSIDs defined under the Basic Wireless Settings tab. If an SSID has been disabled, the
options cannot be configured.
VLAN ID. Select a number between 1 and 4094 to identify the VLAN. Multiple SSIDs can share the same VLAN
value.
Priority. You can assign the default priority (802.1p COS bits) for packets coming in from each wireless network
by selecting a number from the drop-down menu. The higher the number, the higher the priority will be. The
default is 0.
Tx Rate Limiting. You can limit the maximum data rate used in your network to save bandwidth and power
consumption on client devices. The actual data rate is determined by the Auto-Fallback mechanism between your
Access Point and a client device. The default is 54 Mbps for Mixed or G-Only wireless mode, 11 Mbps for B-Only
mode.
WMM. Wi-Fi Multimedia is a QoS feature defined by the WiFi Alliance before IEEE 802.11e was finalized. Now it is
part of IEEE 802.11e. When this is enabled, it provides four priority queues for different types of traffic. It
automatically maps the incoming packets to the appropriate queues based on QoS settings (in the IP or layer 2
header). WMM provides the capability to prioritize wireless traffic in your environment. The default is Disabled
(unchecked).
27
Chapter 6: Configuring the Wireless-G Access Point
The Wireless - VLAN & QoS Tab