Show Port Module - Dell PowerConnect M8428-k Manual

mismatch - both uplink and downlink are connected, but there is a mismatch
10G - uplink and downlink are connected at 10GbE
• Downlink port link state:
- down: blade not present
- 10G: 10GbE link
• Detailed downlink port link states (available in ADMIN level only):
- 10G KR [AN]: 10GBASE-KR link;
AN indicates that 802.3ap autonegotiation is active
• Uplink port link state:
- empty: No module present
- module_type [no link]: Module is present (module type is shown);
no link: optical fiber cable is disconnected
Example:
# show port link
Port Group
--------------------------------------------------------------
1 A (10G)
2 A (10G)
3 A (10G)
4 A (10G)
5 A (10G)
6 A (10G)
7 A (10G)
8 A (10G)
9 B (10G)
10 B (10G)
11 B (10G)
12 B (10G)
13 B (10G)
14 B (10G)
15 B (10G)
16 B (10G)
#
# show port link 7
Port Group
--------------------------------------------------------------
7 A (10G)
#

3.7.3 show port module

Synopsys:
show port module port_number
Description:
Show the transceiver module information for the specified uplink port.
Connect Downlink
10G 10G
10G 10G
10G 10G
10G 10G
10G 10G
mismatch 10G
down down
down down
mismatch 10G
mismatch 10G
mismatch 10G
mismatch 10G
down down
down 10G
mismatch 1G
mismatch 1G
Connection Downlink
down down
Uplink Status
SFP+ SR Link Up
SFP+ SR Link Up
SFP+ LR Link Up
SFP+ SR Link Up
SFP+ SR Link Up
SFP SX Link Down
SFP+ SR Link Down
empty
SFP SX Link Down
SFP SX Link Down
SFP SX Link Down
SFP LX Link Down
empty
SFP+ SR Link Down
SFP+ SR Link Down
SFP+ SR Link Down
Uplink Status
SFP+ SR Link Down
Rev 1.00
19