Pitch Lfo - Alesis QSR 64 Reference Manual

P LFO
ITCH
The Pitch LFO function is most often used to apply vibrato to a sound.
✪
The following Pitch LFO variables will make a difference in the sound only if the PITCH LFO
DEPTH (on Page 6 of the PITCH function) is set to a value other than 0, or, if the Pitch LFO
is a source in the MOD function.
Shape (8 choices)
The waveform shape determines the shape of the LFO. Select either Sine, Triangle,
Square, Up Saw, Down Saw, Random+-, Noise or Random+. Note that the two
Sawtooth waves and the Random+ wave are unipolar and the rest are bipolar:
DOWN SAW
Speed (00 to 99)
Controls the speed or rate of the LFO. For fast modulation, increase this value. For
slower modulation, decrease this value.
Delay (00 to 99)
This is the amount of time that is to occur before the LFO fades in. Sometimes, it is
desirable to have modulation come in a moment or two after a note has been played,
rather than starting instantly. The higher the value, the slower the LFO fades in.
+99
-99
QSR Reference Manual
SINE TRIANGLE
RANDOM+-
0
TIME
Editing Programs: Chapter 6
SQUARE UP SAW
NOISE RANDOM+
Page 1
Page 2
Page 3
30