Choosing Programs In A Mix - Alesis QSR 64 Reference Manual

C
HOOSING
In this section, we will choose Programs for the 16 channels in a Mix, for playing
back tracks from a MIDI sequencer. There are many other aspects of a Mix we may
wish to edit, however. Refer to Chapter 5 for more information about Mix editing.
You do not have to access Mix Edit Mode to select Programs for a Mix (i.e. you don't
have to press the [EDIT SELECT] button). Instead, you simply use a two step process:
A) Use the [
B ) Use the [VALUE] knob to choose a Program for the selected channel.
Here's the process broken down into simpler steps:
➀
Press [MIX] and select Mix 01 from the Preset 1 Bank using the method
described on page 16.
➁
Press [
The display will look like this:
The [
The actual channel number will be whatever channel was last selected. In the illustration
above, channel 1 is shown flashing. If the channel 1 number in your display is not
flashing, Use the [
➂
Use the BANK SELECT [UP] and [DOWN] buttons to select a Program Bank.
➃
Use the [VALUE] knob to select a Program.
➄
Press [MIDI
If channel 1 had been selected, pressing [MIDI
number will flash in the display.
➅
Repeat steps
✪
Changes you make to a Mix are temporary and will be lost if another Mix is selected. To make
changes permanent, you must store the Mix into the User bank (see next page).
QSR Reference Manual
P
ROGRAMS IN A
MIDI
] buttons to select one of the 16 channels in the Mix.
MIDI
].
Mix Number
Program Name and Number
Play Mode
Selected MIDI Channel (flashing)
MIDI
] buttons are used to select one of the 16 channels in the Mix.
MIDI
] buttons to select channel 1.
] to select to the next channel up.
➂ ➄
– as needed to select Programs for the remaining channels.
Your First Session: Chapter 2
M
IX
Program Bank Name
Active MIDI Channels
] will select channel 2. The channel 2
7