Download Print this page

Barska AX11224 Manual

Biometric safe
Hide thumbs Also See for AX11224:

Advertisement

Quick Links

BIOMETRIC
WALL
Keep your valuables from the wrong hands with the Barska
Biometric Safe. The safe opens at the touch of a finger but only
yours. Fingerprint
temporary users, allowing you to control of who can access safe.
The compact design makes it easy to hide nearly anywhere.
Weight of safe is 31 pounds.
NOTE
When selecting a place for the safe please keep in mind
- Safe must be supported
- The door of the safe must be able to swing open at least 850
- For added security, purchase
hardware
store. When using alternate
instructions accordingly.
- Metallic anchors supplied
- These instructions are meant to keep safe in place, and will
not
deter
theft
SETUP
Tools
Needed
lx
- Drill
lx-
15/32"
lx
— 1 5/32"
—SINCE
VALUE. QUALITY.
&
FLOOR
control can store up to 30 permanent
beneath
may not reach wall stud
Drill Bit
Socket
Wrench
02010
BARSKAØ La Verne, CA 91750
www.barska.com
NEW TECHNOLOGY.
SAFE
MOUNTING
by a shelf and/or floor.
31/2wood screws at your local
screws, adjust mounting
Parts
Included
Ix — Allen
2x —Emergency Keys
2x — Flat
2x
Metallic
7 994
or
Wrench
Washers
Anchors

Advertisement

loading
Need help?

Need help?

Do you have a question about the AX11224 and is the answer not in the manual?

Questions and answers

Summary of Contents for Barska AX11224

  • Page 1 WALL & FLOOR MOUNTING Keep your valuables from the wrong hands with the Barska Biometric Safe. The safe opens at the touch of a finger but only yours. Fingerprint control can store up to 30 permanent temporary users, allowing you to control of who can access safe.
  • Page 2 Open safe and from the inside of the safe insert washer into screw. Slide this piece into the shaft. See diagram B. below. Tighten the metallic anchors using the 15/32" socket wrench Close safe Metallic Anchor Diagram of Wall Mounted Safe Wall Metallic Anchors Front of Safe Floor barska.com www.
  • Page 3 Open safe. From the inside of the safe insert washer into screw. Slide this piece into the shaft. Diagram B. Tighten the metallic anchor using the 15/32" socket wrench. Replace liner and close safe. Diagram of Floor Mounted Safe Front of Safe Metallic Anchor Floor www.barska.com 9/10 ac168...