Putting On The Bf-1; Settings; Attaching The Armband - Yamaha BODIBEAT Owner's Manual

Putting on the BF-1

Putting on the BF-1

Attaching the armband

■
Attaching the BF-1 to the armband
1
Connect the earphone cable to the BF-1.
Be sure to push the earphone connector all the way in until the silicon packing
fits to the surface.
CAUTION
• Do not unplug the earphone cable from the BF-1 while using it. If rain, sweat
or any other liquid gets inside the BF-1 through the earphone terminal, the
device could be damaged.
• When disconnecting the earphone cable, hold the connector directly and pull
it. Do not pull on the cable.
n
If the silicone packing comes off, be sure to install it again so that the protruding part on the
silicone packing fits in the corresponding hole on the plug.
2
Attach the device to the armband.
IMPORTANT
• Make sure that the YAMAHA logo can be seen at the top of the arm band. This is the
proper orientation for fitting to the armband.
• Insert the BF-1 fully until a click sound is heard.
BF-1 Owner's Manual
Correct
Incorrect
Starting Up
Exercising
Computer
Music Player

Settings

Troubleshooting
Menu Tree
Index
17