Scott RXI 400 WL Instruction Manual page 9

TIME set
Set the clock
1. Select Settings àTime. The clock time is displayed.
2. Turn the SCROLL/SELECT/SNOOZE knob to adjust the
hour and press it to confirm.
3. Repeat the step (2) to adjust the minutes.
Set the alarm time
1. Select Settings àAlarm à set/enable. The alarm time will be displayed.
2. Follow the steps (2) to (3) in "Set the clock" to set the alarm time.
The unit allows you to choose the sound to which you would like to wake up.
1. To enable the alarm function, select "Settings" à"Alarm" à
"set/enable" and if necessary, set the alarm time. Press the
SELECT button to confirm.
2. To select the alarm source, choose "select source": "FM
preset", "FM tune" (manual tuning to a local FM radio station), "Internet radio",
"USB/SD/MMC" and "buzzer".
3. When the preset alarm time is reached, the unit will switch on with the selected
alarm source.
4. Press the button to stop the alarm and it will sound again the next day at
the same time.
5. To disable the alarm completely, select "Settings" à"Alarm" à "disable".
Note: The default alarm source is the buzzer. When another source is selected
but is not available at the alarm time, it will automatically switch to the
buzzer alarm.
The buzzer volume level is fixed. However the sound level can be adjusted
for the other sources using the VOL +/- button.
SNOOZE function
When the alarm sounds, press the SCROLL/SELECT/SNOOZE knob to stop the
alarm and it will sound again after 8 minutes. This alarm cycle will repeat for up
to one hour. To cancel SNOOZE function and repeat the alarm the next day,
press the button.
GB- 8