Precautions - Scott I-XCR 100 User Manual

PRECAUTIONS

This unit is designed and manufactured with the user's safety in mind, however any improper use or operation may result in certain
dangers. It is therefore highly recommended to read this manual thoroughly and adhere to the following precautions.
SAFETY PRECAUTIONS
To prevent an electrical shock, do not open the housing of the unit. In any case of malfunctioning, only have the unit serviced by an
approved and qualified service center.
Do not expose the unit to any water or to a very humid environment. Do not operate the unit when your hands are wet as this may
cause a short circuit.
For safe driving, keep the volume low in order to concentrate on traffic conditions.
Do not clean the unit with alcohol, only clean with a soft dry cloth.
If the unit has been kept at a high temperature or in a high humidity environment, cool down the car interior before turning on the
unit.
Do not use the unit for a long time without running the vehicle engine, as this may drain the battery and the vehicle engine may not
be able to start.
Before final installation in the dashboard opening, first connect the wiring and make sure the unit is working properly.
Only use parts provided with the unit to ensure proper installation.
Do not route wiring in places subjected to high temperatures where the heat may melt the wiring insulation.
When replacing the fuse, ensure that the new fuse has the capacity recommended by the manufacturer.
OPERATION PRECAUTIONS
Never insert any other objects into the USB port or card slot like a coin or pin, etc as this may cause damage or a short circuit.
If the unit is disconnected from the battery, it will lose memorized data.
GB-3