Touch Screen Controls - Scott DRX950 User Manual

TOUCH SCREEN CONTROLS

Besides using the unit and remote control to perform
operatio ns, you can also do so by using the TFT touch
screen.
RADIO
A description of the different icon functions follows
below:
1. This icon allows you to dim the screen backlight (two
levels).
2. Display the system setup menu.
3 . Touch these icons to select one of the 6 preset stations.
Hold do wn one of the 6 num
frequency under that preset station number.
4. BAND
This icon allows you to
FM1/FM2/FM3/MW1/MW2.
5. LOC
(local stations)
Select lo cal or distant stations.
bers to store the current
se lect one of the following bands:
6. EQ
Select a preset equalizer mode: POP, CLASSIC, ROCK,
OFF.
7. LOUD
Turn the loudness function on/off.
8. Page1
Go to the RDS m
9. SEEK-/SEEK+
Seek a station automatically. Hold down to seek a
station manually.
10. AMS
Touch briefly to scan through the preset stations. Hold
d own this icon to seek and store stations automatically.
RDS
1. TA (traffic announcement)
Turn the
Announcement function on/off.
2.
AF
frequencies)
Turn the AF function o
3. PTY (program type)
This icon allows you to turn the PTY function on. Press
this icon r epeatedly to select a program type.
4. Page 2
This icon allows you to display the RADIO menu. (Refer
to the "RADIO" se
5. SEEK-/SEEK+
These icons allow you to seek a station automatically.
Hold down to seek a station man
EON (Enhanced Other Networks)
ON: The unit keeps searching for alternative frequencies.
If the current station does not broadcast traffic information,
-GB 17-
enu. (Refer to "RDS" for detail)
Traffic
(alternative
n/off.
ction for more details)
ually.