Removal Of Deflection Yoke - Memorex MT1125SM Service Manual

4. Insert one end of the Anode Support into the anode button,
then the other as shown in Fig. 1-5.
CRT
5. Confirm that the Support is securely connected.
6. Put on the Rubber Cap without moving any parts.

2. REMOVAL OF DEFLECTION YOKE

(Refer to Fig. 2-1)
Loosen the screw 1.
1.
2. Remove the Convergence • Purity Magnet in the
direction of arrow (A).
Loosen the screw 2.
3.
4. Remove the 3 Wedges.
5. Remove the Deflection Yoke in the direction of arrow
(B).
Wedge
Deflection Yoke
Wedge
INSTALLATION
Install new Deflection Yoke in reverse steps of REMOVAL.
NOTE
After adjusting the purity and the convergence, fix the
screw 2 and lock the wedges.
DISASSEMBLY INSTRUCTIONS
Support
2
1
(B)
(A)
Convergence •
Purity Magnet
Fig. 1-5
Fig. 2-1
B-2