Table of Contents
Advertisement
UC351BH (MPH6996) OM Eng
Additional information
Symptom
The answering system does not
work.
The answering system does not
answer calls.
Messages are incomplete.
No sound on the base unit
speaker during call monitoring or
message playback.
Cannot access remote call-in
features from another touch-tone
phone.
8/10/01
5:27 PM
Page 55
(continued)
• Make sure the base unit is plugged in.
• Make sure the answering system is turned on.
• Set the record time to either the one minute or
four minute option.
• The memory may be full. Delete some or all of
the saved messages.
• The incoming messages may be too long.
Remind callers to leave a brief message.
• The memory may be full. Delete some or all of
the saved messages.
• Adjust the speaker volume on the base unit.
• Make sure you're using the correct PIN code.
• Make sure that the touch-tone phone you're
using can transmit the tone for at least two
seconds. If it cannot, you may have to use
another phone to access your messages.
Suggestion
55
Advertisement
Table of Contents
