Choose The Dialing Mode - Memorex MPH-6996 Owner's Manual

UC351BH (MPH6996) OM Eng
Step 2
Notes
• Use only the supplied AD-420 AC adapter.
Do not use any other AC adapter.
• Place the base unit close to the AC outlet so
that you can unplug the AC adapter easily.
Tips
• If your telephone outlet isn't modular, contact
your telephone company for assistance.

Choose the dialing mode

Most phone systems use tone dialing which sends DTMF tones through the phone
lines. However some phone systems still use pulse dialing such as in rural areas.
The default setting is tone dialing. Depending on your dialing system, set the mode
as follows:
1) Press and hold
confirmation tone. The current setting appears next
to Dial Mode.
2) To set the dial mode for pulse dialing, press
Or to set the dial mode for tone dialing, press
indicate the setting is complete.
If you are not sure of your dialing system, set for tone
dialing. Make a trial call. If the call connects, leave the
setting as is, otherwise set for pulse dialing.
Note
Make sure your battery pack is fully charged before choosing the dial mode.
12
8/10/01 5:25 PM
(continued)
until you hear a
. A confirmation tone sounds to
Page 12
Polarity of the plug
Modular
.