Connect The Base Unit - Memorex MPH-6996 Owner's Manual

UC351BH (MPH6996) OM Eng
Step 2
(continued)

Connect the base unit

If you want to install the base unit on the wall, see page 51.
3
Note
Place the power cord where it will not create a trip hazard, or where it could become
chafed and create a fire or electrical hazard.
8/10/01 5:25 PM Page 11
1
Connect the telephone line cord to
the TEL LINE jack and to a telephone
outlet.
2
Connect the AC adapter to the
DC IN 9V jack and to a standard
120V AC wall outlet.
3
Set the base unit on a desk or
tabletop and place the handset on
the base unit.
Then raise the antenna to a vertical
position.
11