Storing Caller Id Messages In Memory - Memorex MPH-6996 Owner's Manual

UC351BH (MPH6996) OM Eng
Caller ID Features

Storing Caller ID messages in Memory

Messages shown in the Caller ID list can be stored for memory dialing.
Using the incoming call information (i.e., Caller ID list), the phone number of the party
on the Caller ID list can be stored in memory dialing.
4
Press
name and number from the Caller ID list.
Press the number keypad (
5
Press
A tone will sound. The number is stored
in memory, and the display returns to the
Caller ID list.
Notes
• If a message has already been stored in the
selected memory location, a verification screen is
displayed. Press
Press
• You can not store a Caller ID message if no phone number appears in the message.
• If no key is pressed for more than 20 seconds, an error tone sounds and the
telephone returns to the standby mode.
• If there is an incoming call or page, memory storage is canceled and the telephone
is set to the incoming call or page.
• You can store a Caller ID message (name) up to 14 characters, rest characters will
be deleted.
34
8/10/01 5:26 PM
(continued)
or to select the memory location where you wish to store the
-
.
to select " ".
to overwrite. The display returns to the Caller ID list.
Page 34
1
Press
2
Display the phone number to be
stored from the Caller ID list. (See
page 30.)
3
Press .
) and select the number (0-9).
.