Table of Contents
Advertisement
MPH-4495 O/M.QXD
7/9/01
ANSWERING MACHINE OPERATION
5
To stop playback, press the
PLAY/STOP button and the unit will
save the previous messages.
NOTES:
•
After playing the ICMs, the unit will automatically reset to take new messages.
•
The maximum recording time for an ICM (Incoming Message) is 60 seconds.
IF MEMORY IS FULL
If the memory is full, the unit will not allow any new messages.
DELETING INCOMING MESSAGES AND MEMOS
1
To erase a single message or memo
while playing it back, press the
DELETE button and the display will
show "DELETE?". Press the DELETE
button again to delete the single
message. The unit will delete the
current message and play the next
message.
9:02 AM
Page 21
CHANGING THE REMOTE CODE
To change the remote code, please
follow the instructions given on pages
8 and 9.
NOTES:
• If a power failure occurs and there
is a dead or no battery, the Access
Code resets to 000.
• If you forget the Access Code,
unplug the AC adaptor and
disconnect the battery and it will
reset to 000.
• Be sure to write down your new
Access Code and store it in a safe
place.
2
To delete all the messages, press and
hold the DELETE button while in the
Play mode until "DELETE ALL?"
appears in the display. Press the
DELETE button to confirm.
21
Advertisement
Table of Contents
