Related Manuals for Memorex MPH4385
Summary of Contents for Memorex MPH4385
- Page 1 MPH-4385 (REVISED2/01).O/M.QXD 6/20/01 7:41 AM Page 18 13 MEMORY DESKTOP TELEPHONE WITH CALLER ID AND CALL WAITING MODEL: MPH4385 BEFORE OPERATING THIS PRODUCT, PLEASE READ THESE INSTRUCTIONS COMPLETELY.
- Page 2 MPH-4385 (REVISED2/01).O/M.QXD Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
-
Page 3: Important Safety Instructions
9. Do not use the telephone to report a gas leak in the vicinity of the leak. 10. Do not allow anything to rest on the telephone cord. Do not locate this product where the cord will be abused by persons walking on it. - Page 4 FCC registered telephone to their lines. They may ask you for the FCC registration number and the ringer equivalence number (REN); both are at the bottom of the base.
-
Page 5: Location Of Controls
3. DC 6V Jack (rear of unit) 4. FLASH Button 5. RINGER (HI/LO/OFF) Switch 6. Display 7. ERASE Button 8. TONE/PULSE Switch 9. Telephone Line Jack (rear of unit) 10. DIAL Button 11. Battery Compartment (bottom of unit) 6/20/01 7:41 AM Page 4 12. -
Page 6: Installation
4. Plug the telephone line cord into the modular wall jack. 5. Reverse the position of the Wall Mount Hook on the base as shown in Figures 3 and 4. -
Page 7: Power Sources
Ð RESET SWITCH: The RESET switch is located at the bottom of the unit. If the telephone locks up or does not work properly, it must be reset, but the call and program memory will be lost. BATTERY PRECAUTIONS Follow these precautions when using batteries in this device: 1. -
Page 8: Telephone Operation
When you receive a call, the unit will automatically set the time and date. • The caller ID memory can store up to 80 name/numbers. • The telephone should be programmed in on-hook status. 6/20/01 7:41 AM Page 7 Press the UP or DOWN button... - Page 9 HI or LO position to turn the ringer on. TONE/PULSE Switch Slide the TONE/PULSE switch to TONE or PULSE to match the service provided on your telephone line. If you are not sure of your service, please contact your telephone company. 6/20/01...
-
Page 10: Message Waiting
MPH-4385 (REVISED2/01).O/M.QXD TELEPHONE OPERATION FLASH Button Press the FLASH button to hang up the phone without having to return it to the base. This is useful for using the phone with the Call Waiting feature. HOLD Button Press the HOLD button to put the caller on hold;... - Page 11 TELEPHONE OPERATION Manually Storing/Accessing Numbers in One-Touch Memories (M1-M3) This telephone is equipped with 3 memories for programming your most frequently dialed telephone numbers. You can store up to 16 digits in each memory position. Press the PROGRAM button , then press the key buttons (0–9)
- Page 12 Manually Storing/Accessing Numbers in Two-Touch Memories (0-9) This telephone is equipped with 10 additional memories for programming your most frequently dialed telephone numbers. You can store up to 16 digits in each memory position. Press the PROGRAM button , then press the key buttons (0–9)
-
Page 13: Receiving A Call
MPH-4385 (REVISED2/01).O/M.QXD CALLER ID OPERATION RECEIVING A CALL Make sure that the Caller ID service is turned on by your phone company. When you receive a call, the display will show the name, number, time and date of the caller. CALL# If a call is received from a caller that has blocked his/her information, the... - Page 14 MPH-4385 (REVISED2/01).O/M.QXD CALLER ID OPERATION TO DELETE 1 CALL TO DELETE ALL CALLS TO AUTOMATICALLY DIAL A NUMBER IN THE CALLER ID DISPLAY (ON HOOK) Select the number using the UP and DOWN buttons . Press the DIAL button , the display will show “PICK UP or ADJ”.
-
Page 15: Call Waiting
3. Keep your unit away from heating appliances. RESET SWITCH: The RESET switch is located at the bottom of the unit. If the telephone locks up or does not work properly, it must be reset, but the call and program memory will be lost. -
Page 16: Troubleshooting Guide
MPH-4385 (REVISED2/01).O/M.QXD TROUBLESHOOTING GUIDE SYMPTOM POSSIBLE CAUSE Telephone not Phone Locked Up. working. No Dial Tone Line cord not connected correctly. Phone does not RINGER switch set to ring. OFF position. Line cord not connected correctly. Wall Jack not working. - Page 17 MPH-4385 (REVISED2/01).O/M.QXD We at Memorex believe you will be pleased with your new product. Please read this Warranty Carefully. Memorex warrants this product to be free from manufacturing defects including original parts and workmanship for a period of ninety (90) days from the date of original purchase in, and if used in, the United States.
- Page 18 MPH-4385 (REVISED2/01).O/M.QXD 6/20/01 7:41 AM Page 17 Memcorp, Inc. Weston, FL 33331 Printed in Hong Kong Visit our website at www.memorex.com...