Security Code; Remote Operation - Memorex MPH-4489 Operating Instructions Manual

MPH-4489.O/M.QXD 5/25/01

SECURITY CODE

This unit can be operated from almost any touch-tone phone. The Security Code
is preset to 000. You can operate the unit remotely with this code, but we suggest
you set your own new code. To change this code, follow the instructions below.
1
1
2
Press and hold the DELETE button
for 2 seconds, and then release; the
unit will say the first digit of the
security code. Press the SKIP/DOWN
and/or the SKIP/UP buttons
set the first digit of the security code.
3
1
2
Press the DELETE button
the unit will say the third digit of the
security code. Press the SKIP/DOWN
and/or the SKIP/UP buttons
set the third digit of the security code.
NOTES:
• If a power failure occurs and there is a dead or no battery, the Access Code resets to
000.
• If you forget the Access Code, unplug the AC adaptor and disconnect the battery and it
will reset to 000.
• Be sure to write down your new Access Code and store it in a safe place.
11:35 AM Page 18

REMOTE OPERATION

2
3
Press the DELETE button
the unit will say the second digit of the
security code. Press the SKIP/DOWN
and/or the SKIP/UP buttons
to
set the second digit of the security
code.
4
3
again; Press the DELETE button again and
the unit will say the 3 digit number you
set.
to
E–18
1
2
3
again;
to