Table of Contents
Advertisement
MPH-4489.O/M.QXD
5/25/01
ANSWERING MACHINE OPERATION
RECORDING OGM (OUTGOING MESSAGE )
Recording an OGM allows the caller to hear the OGM and then be able to leave a
message. Please note that there is an automatic message on this unit, recording
a new OGM will record over this default message.
1
Press and hold the OGM button for
approximately 2 seconds until a short
beep is heard ("rA" will appear in the
display), and then release the button.
Begin recording your outgoing message
speaking in a normal tone of voice.
Typical Message: "You have reached
the Smith residence. We are not able
to come to the phone right now. If
you'll leave your name, phone number
and a brief message after the beep,
we will call you back."
NOTES:
•
The maximum recording time for an OGM is 60 seconds.
•
If an invalid OGM is left, the unit will revert back to the default OGM.
•
Make sure to raise the SPEAKER VOLUME when setting the OGM.
•
If you forget the Access Code, unplug the AC adaptor and disconnect the
battery and it will reset to 000.
VERIFYING THE OUTGOING MESSAGE
1
11:35 AM
Page 13
2
2
When finished recording, press the
PLAY/STOP button
will sound and the newly recorded
outgoing message will then play once;
"PA" will appear in the display. Make
sure the SPEAKER VOLUME control
is at a desirable level.
To record a new outgoing message,
please repeat steps 1 and 2.
Press and release the OGM button
and the selected Outgoing Message
will play.
E–13
1
. A short beep
Advertisement
Table of Contents
