Associating The Handheld Package Or The Handheld User Package - Novell ZENWORKS HANDELD MANAGEMENT 7 SP1 IR4 - ADMINISTRATION Administration Manual

Time Since Last Connection: Select the Enforce Self-destruct check box and specify the
number of days after the last connection before activating the self-destruct feature. The Time
Since Last Connection option refers to the last time the handheld device connected to the
ZENworks Handheld Management Access Point.
Each day is made up of 24 hours. If you connect (synchronize) the device on Monday at 2 p.m.
and specify three days after the last connection before activating the self-destruct feature, the
self-destruct feature activates Thursday at 2 p.m (72 hours after the last connection/
synchronization) unless the device is connected/synchronized during that period.
8 Click OK to save the policy.
9 When you have finished configuring all of the policies for this package, continue with the steps
under "Associating the Handheld Package or the Handheld User Package" on page 73
associate the policy package.
10 If desired, schedule the policy. For more information, see
on page 74.
11 (Optional) To ensure that the Handheld Management Server immediately receives the new
policy changes, right-click the Handheld service object, then click Scan Now.
Replacing the ZENworks Handheld Management Password Dialog Box Bitmap
Image
You can replace the ZENworks Handheld Management bitmap image that displays in the following
ZENworks Handheld Management password dialog boxes with a bitmap image of your choosing:
The login dialog box if you selected Enable Enhanced Password Support in
The dialog boxes that display when the WinCE Security policy is enforced and you selected
Require a Password to Be Set on the Handheld in
To replace the bitmap image in these dialog boxes, create a bitmap file called
place it in the ZENworks Handheld Management installation directory on the handheld device.
The size of this bitmap image should be 240 pixels wide by 35 pixels high.
2.4.15 Associating the Handheld Package or the Handheld
User Package
The policies you configured and enabled are not in effect until you associate their policy package
with a handheld device object, a User object, a handheld group object, a user group, or a container
object.
1 In ConsoleOne, right-click the Handheld Package or Handheld User Package object, then click
Properties.
2 Click the Associations tab, then click Add.
3 Browse for the object for associating the package, then click OK.
The Handhelds Package can be associated with a handheld device object, a handheld group
object, or a container object containing these objects.
The Handhelds User Package can be associated with a User object, a user group object, or a
container object containing these objects.
"Scheduling Packages and Policies"
Step 5 on page 69.
Using ZENworks Handheld Management Policies
to
Step 5 on page 69.
and
logo.bmp
73